FlexExtend Skatewheel Selection Guide
FlexExtend Skatewheel Conveyors
The FlexExtend conveyor is flexible and extendable. FlexExtend is a great solution for moving product in retail, fulfillment, manufacturing, and shipping environments and is best suited for loads that have firm flat bottoms such as cartons, totes, cases, etc. These units provide low cost conveyance flexibility. Key features include:
- Flexible to convey around obstacles. These units can be curved up to 180°
- Can be extended and collapsed as required
- The individual skatewheels allow product to self-track when maneuvering around a curve.
- The skatewheels flow more easily than rollers allowing for less slope. FlexExtend's standard polymer wheels provide the greatest flow-ability.
- Each unit's handle is collapsible
- Built. to last much longer than the low cost, low-quality versions you will see on the market from other manufacturers.
Refer to the chart below for an explanation of our FlexExtend part numbers.
The following table list the standard lengths available for each width of conveyor:
Overall Length Extended |
Overall Length Collapsed |
| 8' 10" | 2' 3" |
| 12' 9" | 3' 2" |
| 16' 8" | 4' 2" |
| 20' 7" | 5' 2" |
| 24' 7" | 6' 1" |
|
32' 5" |
8' 1" |
|
36' 4" |
9' 0"
|
Additional Standard Features
Load Capacity: 300 pounds per foot
Legs: Two welded crossbraces
Adjustable Height: 28" to 43"
Casters: 5" diameter braking
Skatewheel Type: Black polymer (standard) or zinc plated steel (optional)
Axle Centers: 1.3" (collapsed) / 5.2" (fully extended)
Axle Size: 5/16 inches
Minimum Flexed Inside Radius: 30"
Wheels Per Axle:
18" Wide |
24" Wide |
30" Wide |
36" Wide |
| 6 | 9 | 12 | 15 |